|
|
| RF/Microwave Isolator & Circulator Series |
Home > Isolators & Circulators |
An RF isolator is a two-port passive device made of magnets and ferrite material which is used to protect other RF components from excessive signal reflection, while an RF circulator is a three-port passive device used to control the direction of signal flow in a circuit. MECA offers twenty-four models of isolators and circulators in both N & SMA-Female connectors with average power ratings from 2 - 250 watts. The most “popular” frequency bands between 0.8 - 18.0 GHz are readily available and can ship from STOCK to 4 weeks after receipt of your order.
|
|
|
| Application Note |
Isolator/Circulator basic theory and definitions, common applications, power ratings, special handling and storage considerations.
more>> |
| |
| Request a Catalog |
| For your convenience, our full-line Signal Control Product Catalog is available in downloadable and hard-copy formats. Select one. |
|
|
| Quote Request |
RF/Microwave Isolator & Circulator Product Overview 
Made in USA
|
|
|
| RF Isolators |
Catalog
Number |
Connector
Style |
Frequency
(GHz) |
Insertion
Loss
(Max) |
VSWR
(Max) |
Isolation
(Min) |
Power
(Watts)
Average |
Operating
Case Temp
(°C) |
| IS-0.750 | SMA-Female | 0.7-0.8 | 0.4 | 1.25:1 | 20 dB | 2 | -20 to +65
| | IN-0.750 | N-Female | 0.7-0.8 | 0.4 | 1.25:1 | 20 dB | 2 | -20 to +65
| | IS-0.900 | SMA-Female | 0.8-1.0 | 0.4 | 1.25:1 | 20 dB | 2 | -20 to +65
| | IN-0.900 | N-Female | 0.8-1.0 | 0.4 | 1.25:1 | 20 dB | 2 | -20 to +65
| | IS-1.950 | SMA-Female | 1.7-2.2 | 0.4 | 1.25:1 | 20 dB | 2 | -20 to +65
| | IN-1.950 | N-Female | 1.7-2.2 | 0.4 | 1.25:1 | 20 dB | 2 | -20 to +65
| | IS-2.500 | SMA-Female | 2.3-2.7 | 0.4 | 1.25:1 | 20 dB | 2 | -20 to +65
| | IN-2.500 | N-Female | 2.3-2.7 | 0.4 | 1.25:1 | 20 dB | 2 | -20 to +65
| | IS-3.000 | SMA-Female | 2.0-4.0 | 0.6 | 1.35:1 | 17 dB | 2 | 0 to +65
| | IN-3.000 | N-Female | 2.0-4.0 | 0.6 | 1.35:1 | 17 dB | 2 | 0 to +65
| | IS-6.000 | SMA-Female | 4.0-8.0 | 0.5 | 1.30:1 | 18.5 dB | 2 | -10 to +65
| | IN-6.000 | N-Female | 4.0-8.0 | 0.5 | 1.30:1 | 18.5 dB | 2 | -10 to +65
| | IS-10.200 | SMA-Female | 8.0-12.4 | 0.4 | 1.30:1 | 18 dB | 2 | -10 to +60
| | IS-15.200 | SMA-Female | 12.4-18.0 | 0.4 | 1.30:1 | 18 dB | 2 | -10 to +60
|
| RF Circulators |
Catalog
Number |
Connector
Style |
Frequency
(GHz) |
Insertion
Loss
(Max) |
VSWR
(Max) |
Isolation
(Min) |
Power
(Watts)
Average |
Operating
Case Temp
(°C) |
| CS-0.750 | SMA-Female | 0.7-0.8 | 0.4 | 1.25:1 | 20 dB | 250 | -20 to +65
| | CN-0.750 | N-Female | 0.7-0.8 | 0.4 | 1.25:1 | 20 dB | 250 | -20 to +65
| | CS-0.900 | SMA-Female | 0.8-1.0 | 0.4 | 1.25:1 | 20 dB | 250 | -20 to +65
| | CN-0.900 | N-Female | 0.8-1.0 | 0.4 | 1.25:1 | 20 dB | 250 | -20 to +65
| | CS-1.950 | SMA-Female | 1.7-2.2 | 0.4 | 1.25:1 | 20 dB | 150 | -20 to +65
| | CN-1.950 | N-Female | 1.7-2.2 | 0.4 | 1.25:1 | 20 dB | 150 | -20 to +65
| | CS-2.500 | SMA-Female | 2.3-2.7 | 0.4 | 1.25:1 | 20 dB | 150 | -20 to +65
| | CN-2.500 | N-Female | 2.3-2.7 | 0.4 | 1.25:1 | 20 dB | 150 | -20 to +65
| | CS-3.000 | SMA-Female | 2.0-4.0 | 0.6 | 1.35:1 | 17 dB | 25 | 0 to +65
| | CN-3.000 | N-Female | 2.0-4.0 | 0.6 | 1.35:1 | 17 dB | 25 | 0 to +65
| | CS-6.000 | SMA-Female | 4.0-8.0 | 0.5 | 1.30:1 | 18.5 dB | 2 | -10 to +65
| | CN-6.000 | N-Female | 4.0-8.0 | 0.5 | 1.30:1 | 18.5 dB | 2 | -10 to +65
| | CS-10.200 | SMA-Female | 8.0-12.4 | 0.5 | 1.30:1 | 18 dB | 2 | -10 to +60
| | CS-15.200 | SMA-Female | 12.4-18.0 | 0.4 | 1.30:1 | 18 dB | 2 | -10 to +60
|
Notes:
1. Isolators are designed with an internal 2W load capability. Consult factory for application information.
2. Higher Isolator power levels can be achieved utilizing our circulators with an external load. MECA carries an
extensive selection
of high power loads. Please consult with a MECA applications engineer to discuss
your requirement.
3. Isolation performance contingent on a VSWR of 1.05:1 Max. on terminated ports.
4. Circulator power rated into a load mismatch of 1.05:1 all phase angles.
5. Additional frequency ranges available, please consult with factory for specific ranges.
6. Heat sink temperature must not exceed the maximum operating temperature specified. |
Request a Quote On-Line or Call 866-444-6322 |
| |
| |
|
|
|
