|
| Related Power Dividers |
SMA-Female |
|
|
|
| |
|
|
| |
N-Female |
|
|
|
|
| |
|
|
| |
7/16 DIN |
|
|
|
|
| |
|
|
| |
TNC |
|
|
|
|
| |
|
|
| |
BNC |
|
|
|
|
|
| |
| Lead-Free Solder |
MECA products assembled with lead-free solder.
Our standard finish on these products is yellow iridite which contains chromium. For full RoHS compliant models, simply request a "/R" after the catalog number when requesting P&D. |
| |
| Model Descriptions |
Power Divider/Combiners
Compact microstrip power divider/combiners delivering high isolation, minimal insertion loss and exceptional phase and amplitude balance.
“Tee” Configuration
Allows unobstructed access to all connector ports. Covering all wireless bands from 0.8 - 3.0 GHz, 2.4 GHz and 5.8 GHz.
Ideal for in-building wireless systems.
DC Blocking
Constructed with DC blocking capacitors on all ports except those that are intended to pass DC.
M-Series
50-watt, Wilkinson series ideally suited for 0.8 to 2.2 GHz to extend system coverage.
H-Series
100 watt, Wilkinson series ideally designed for systems applications.
Reactive Splitters
High-power capable (200 watts) covering all wireless frequencies from 0.800 - 2.700 GHz. |
| |
| Application Note MAP-801 |
Why most Power Dividers are not suitable for combining. The limiting factor for most Wilkinson power dividers used as combiners is power dissipation. more... |
| |
| Splitter Application Note |
Basic introduction, common applications and information on why a Reactive RF Splitter should not be used in combining applications. more... |
| |
|
|
Additional Power Divider/Combiners |
Home > Power Dividers > Additional Models |
MECA offers the industry’s most comprehensive selection of power divider/combiners. Below is a listing of models currently offered in 2-way through 8-way, N & SMA-Female connector configurations. These models have been superseded by our “Top Selling” models shown on the previous page and are subject to availability. Please note that these models are still currently manufactured and fully supported; however, may have slightly longer leadtimes.
| Quote Request |
Additional Power Divider/Combiners
(subject to availability) |
|
| SMA-Female Power Divider/Combiners2 |
Catalog
Number |
Freq.
(GHz) |
Power
(W) |
Isolation
(dB) |
Insertion
Loss (dB) |
Amplitude
Balance
(dB)
(Max) |
Phase
Balance
(degrees)
(Max) |
VSWR |
| Input |
Output |
| Typ |
Min |
Typ |
Max |
Typ |
Max |
Typ |
Max |
| 2-Way SMA |
| 802-2-0.900 | 0.8-1.0
0.6-1.2 | 20 | 40
25 | 30
20 | 0.20
0.20 | 0.25
0.30 | 0.1
0.1 | 1
2 | 1.10:1
1.15:1 | 1.15:1
1.25:1 | 1.10:1
1.10:1 | 1.15:1
1.15:1 | | 802-S-1.900-M01 | 0.8-3.0 | 20 | 27 | 22 | 0.40 | 0.50 | 0.2 | 3 | 1.10:1 | 1.20:1 | 1.10:1 | 1.20:1 | | 802-2-1.950 | 1.7-2.2
1.3-2.6 | 20 | 40
25 | 30
20 | 0.20
0.25 | 0.25
0.35 | 0.1
0.1 | 1
2 | 1.10:1
1.30:1 | 1.15:1
1.40:1 | 1.10:1
1.10:1 | 1.15:1
1.20:1 | | 802-2-2.100 | 1.5-2.7 | 20 | 30 | 25 | 0.20 | 0.30 | 0.1 | 2 | 1.15:1 | 1.25:1 | 1.10:1 | 1.20:1 | | 3-Way SMA |
| 803-2-0.900 | 0.8-1.0
0.6-1.2 | 20 | 40
25 | 30
20 | 0.30
0.30 | 0.35
0.40 | 0.2
0.2 | 3
3 | 1.10:1
1.35:1 | 1.15:1
1.45:1 | 1.10:1
1.10:1 | 1.15:1
1.15:1 | | 803-S-1.900-M01 | 0.8-3.0 | 20 | 27 | 22 | 0.60 | 0.80 | 0.4 | 6 | 1.20:1 | 1.30:1 | 1.10:1 | 1.20:1 | | 803-2-1.950 | 1.7-2.2 | 20 | 35 | 30 | 0.35 | 0.40 | 0.2 | 3 | 1.15:1 | 1.20:1 | 1.15:1 | 1.20:1 | | 803-2-2.100 | 1.5-2.7 | 20 | 30 | 25 | 0.40 | 0.50 | 0.2 | 3 | 1.20:1 | 1.30:1 | 1.10:1 | 1.20:1 | | 4-Way SMA |
| 804-2-0.900 | 0.8-1.0
0.6-1.2 | 20 | 35
22 | 30
18 | 0.40
0.60 | 0.50
0.80 | 0.2
0.2 | 3
3 | 1.15:1
1.40:1 | 1.20:1
1.60:1 | 1.05:1
1.10:1 | 1.10:1
1.15:1 | | 804-S-1.900-M01 | 0.8-3.0 | 20 | 25 | 20 | 0.80 | 1.00 | 0.2 | 4 | 1.25:1 | 1.35:1 | 1.15:1 | 1.25:1 | | 804-2-2.100 | 1.5-2.7 | 20 | 30 | 25 | 0.50 | 0.60 | 0.2 | 4 | 1.20:1 | 1.30:1 | 1.10:1 | 1.20:1 | | 6-Way SMA |
| 806-2-0.900 | 0.8-1.0
0.6-1.2 | 20 | 30
22 | 25
17 | 0.40
0.50 | 0.50
0.70 | 0.2
0.2 | 3
3 | 1.10:1
1.40:1 | 1.15:1
1.50:1 | 1.10:1
1.25:1 | 1.15:1
1.35:1 | | 806-S-1.900-M01 | 0.8-3.0 | 20 | 25 | 20 | 0.80 | 1.20 | 0.4 | 8 | 1.30:1 | 1.45:1 | 1.20:1 | 1.35:1 | | 806-2-2.100 | 1.5-2.7 | 20 | 27 | 22 | 0.60 | 0.80 | 0.3 | 6 | 1.25:1 | 1.35:1 | 1.10:1 | 1.20:1 | | 8-Way SMA |
| 808-2-0.900 | 0.8-1.0
0.6-1.2 | 20 | 32
23 | 27
18 | 0.60
0.80 | 0.70
1.20 | 0.2
0.2 | 4
4 | 1.10:1
1.40:1 | 1.15:1
1.50:1 | 1.10:1
1.25:1 | 1.15:1
1.35:1 | | 808-S-1.900-M01 | 0.8-3.0 | 20 | 25 | 20 | 1.00 | 1.40 | 0.3 | 8 | 1.30:1 | 1.40:1 | 1.15:1 | 1.25:1 | | 808-2-2.100 | 1.5-2.7 | 20 | 30 | 25 | 0.80 | 0.90 | 0.3 | 6 | 1.25:1 | 1.35:1 | 1.10:1 | 1.20:1 | | 12-Way SMA |
| 812-2-2.100 | 1.5-2.7 | 20 | 25 | 20 | 1.00 | 1.20 | 0.4 | 8 | 1.25:1 | 1.35:1 | 1.15:1 | 1.25:1 | | 16-Way SMA |
| 816-2-2.100 | 1.5-2.7 | 20 | 27 | 22 | 1.20 | 1.50 | 0.4 | 8 | 1.30:1 | 1.40:1 | 1.10:1 | 1.20:1 |
| N-Female Power Divider/Combiners2 |
Catalog
Number |
Freq.
(GHz) |
Power
(W) |
Isolation
(dB) |
Insertion
Loss (dB) |
Amplitude
Balance
(dB)
(Max) |
Phase
Balance
(degrees)
(Max) |
VSWR |
| Input |
Output |
| Typ |
Min |
Typ |
Max |
Typ |
Max |
Typ |
Max |
| 2-Way N |
| 802-4-0.750 | 0.5-1.0 | 20 | 25 | 22 | 0.20 | 0.30 | 0.1 | 2 | 1.15:1 | 1.20:1 | 1.10:1 | 1.15:1 | | 802-4-0.900 | 0.8-1.0
0.6-1.2 | 20 | 40
25 | 30
20 | 0.20
0.20 | 0.25
0.30 | 0.1
0.1 | 1
2 | 1.10:1
1.20:1 | 1.15:1
1.25:1 | 1.10:1
1.10:1 | 1.15:1
1.15:1 | | 802-4-1.500 | 1.0-2.0 | 20 | 25 | 22 | 0.20 | 0.30 | 0.1 | 2 | 1.15:1 | 1.20:1 | 1.10:1 | 1.15:1 | | 802-4-1.900 | 0.8-3.0 | 20 | 27 | 22 | 0.40 | 0.50 | 0.2 | 3 | 1.10:1 | 1.20:1 | 1.10:1 | 1.20:1 | | 802-4-1.950 | 1.7-2.2
1.3-2.7 | 20 | 40
25 | 30
20 | 0.20
0.30 | 0.25
0.40 | 0.1
0.1 | 1
2 | 1.10:1
1.20:1 | 1.15:1
1.30:1 | 1.10:1
1.10:1 | 1.15:1
1.15:1 | | 802-4-2.400 | 2.1-2.7
1.6-3.2 | 20 | 40
50 | 30
20 | 0.20
0.20 | 25
0.30 | 0.1
0.1 | 1
2 | 1.10:1
1.20:1 | 1.15:1
1.25:1 | 1.10:1
1.10:1 | 1.15:1
1.15:1 | | 3-Way N |
| 803-4-0.900 | 0.8-1.0
0.6-1.2 | 20 | 40
25 | 30
20 | 0.30
0.30 | 0.40
0.40 | 0.2
0.2 | 3
3 | 1.10:1
1.25:1 | 1.15:1
1.35:1 | 1.10:1
1.10:1 | 1.15:1
1.20:1 | | 803-4-1.900 | 0.8-3.0 | 20 | 27 | 22 | 0.60 | 0.80 | 0.4 | 6 | 1.20:1 | 1.30:1 | 1.10:1 | 1.20:1 | | 803-4-2.100 | 1.5-2.7 | 20 | 35 | 30 | 0.35 | 0.45 | 0.2 | 3 | 1.15:1 | 1.20:1 | 1.10:1 | 1.15:1 | | 4-Way N |
| 804-4-1.900 | 0.8-3.0 | 20 | 25 | 20 | 0.80 | 1.00 | 0.2 | 4 | 1.25:1 | 1.35:1 | 1.15:1 | 1.25:1 | | 804-4-1.950 | 1.7-2.2
1.3-2.6 | 20 | 23
20 | 27
15 | 0.50
0.70 | 0.60
0.90 | 0.2
0.2 | 3
4 | 1.15:1
1.20:1 | 1.20:1
1.30:1 | 1.10:1
1.10:1 | 1.15:1
1.20:1 | | 804-4-2.100 | 1.5-2.7 | 20 | 32 | 27 | 0.50 | 0.60 | 0.2 | 3 | 1.15:1 | 1.20:1 | 1.10:1 | 1.15:1 | | 6-Way N |
| 806-4-0.900 | 0.8-1.0
0.6-1.2 | 20 | 35
22 | 30
17 | 0.40
0.50 | 0.50
0.70 | 0.2
0.2 | 3
3 | 1.15:1
1.40:1 | 1.20:1
1.50:1 | 1.10:1
1.25:1 | 1.15:1
1.35:1 | | 806-4-1.900 | 0.8-3.0 | 20 | 25 | 20 | 0.80 | 1.20 | 0.4 | 8 | 1.30:1 | 1.45:1 | 1.20:1 | 1.35:1 | | 806-4-2.100 | 1.5-2.7 | 20 | 30 | 25 | 0.60 | 0.70 | 0.2 | 3 | 1.30:1 | 1.40:1 | 1.10:1 | 1.20:1 | | 8-Way N |
| 808-4-0.900 | 0.8-1.0 | 20 | 32 | 27 | 0.80 | 1.00 | 0.2 | 3 | 1.20:1 | 1.25:1 | 1.10:1 | 1.15:1 | | 808-4-1.900 | 0.8-3.0 | 20 | 25 | 20 | 1.00 | 1.40 | 0.3 | 8 | 1.30:1 | 1.40:1 | 1.15:1 | 1.25:1 | | 808-4-2.100 | 1.5-2.7 | 20 | 30 | 25 | 0.80 | 0.90 | 0.2 | 4 | 1.15:1 | 1.20:1 | 1.10:1 | 1.15:1 | | 12-Way N |
| 812-4-0.900 | 0.8-1.0 | 20 | 40 | 30 | 0.80 | 1.00 | 0.3 | 6 | 1.10:1 | 1.15:1 | 1.10:1 | 1.15:1 | | 812-4-2.100 | 1.5-2.7 | 20 | 30 | 22 | 0.80 | 1.00 | 0.3 | 6 | 1.30:1 | 1.40:1 | 1.10:1 | 1.20:1 | | 16-Way N |
| 816-4-0.900 | 0.8-1.0 | 20 | 32 | 27 | 1.20 | 1.30 | 0.2 | 8 | 1.10:1 | 1.15:1 | 1.10:1 | 1.15:1 | | 816-4-2.100 | 1.5-2.7 | 20 | 30 | 25 | 1.60 | 1.70 | 0.4 | 8 | 1.25:1 | 1.35:1 | 1.10:1 | 1.20:1 |
Request a Quote On-Line or Call 866-444-6322
Notes:
1. Insertion loss above 3.01 dB theoretical 2-way power divider split.
2. All units rated for maximum input power as a divider or balanced combiner with load
VSWR of 1.20:1 or better.To calculate the combining rated power the following formula is used:
(rated input power of divider * 5%) / "N" # of input channels = max input at each port for combining.
3. All output/power combiner ports are in-phase (0° difference).
4. 50 ohm nominal impedance standard.
5. Operating temperature from -55° C to +85° C.
6. N-Male, SMA-Female and TNC connectors are also available in this series.
| Theoretical power split (dB) for "n-way" power divider |
| 2-Way |
3-Way |
4-Way |
6-Way |
8-Way |
9-Way |
12-Way |
16-Way |
| 3.01 |
4.77 |
6.02 |
7.78 |
9.03 |
9.54 |
10.79 |
12.04 |
|
|
|
|
|
