QMA Power Divider/Combiner |
|
MECA introduces QMA Power Divider & Combiner series covering the 0.700 - 2.700 GHz frequency range for use in all wireless applications from cellular through UMTS.
QMA Power Divider/Combiner
Made in USA
| SMA-Female DC Blocking Power Dividers | |||||||||||||
| Catalog Number |
Freq. (GHz) |
Power (W) |
Isolation (dB) |
Insertion Loss (dB) |
Amplitude Balance (dB) (Max) |
Phase Balance (degrees) (Max) |
VSWR | RFQ | |||||
| Input | Output | ||||||||||||
| Typ | Min | Typ | Max | Typ | Max | Typ | Max | ||||||
| 802-10-1.700V | 0.7-2.7 | 40 | 22 | 20 | 0.50 | 0.75 | 0.3 | 4 | 1.20:1 | 1.30:1 | ~ | ~ | |
| 803-10-1.700V | 0.698-2.7 | 40 | 27 | 22 | 0.60 | 0.80 | 0.4 | 6 | 1.25:1 | 1.45:1 | 1.10:1 | 1.20:1 | |
| 804-10-1.700V | 0.698-2.7 | 40 | 25 | 20 | 0.80 | 1.00 | 0.2 | 4 | 1.20:1 | 1.50:1 | 1.15:1 | 1.25:1 | |
| 808-10-1.700V | 0.698-2.7 | 40 | 25 | 20 | 1.00 | 1.40 | 0.3 | 8 | 1.30:1 | 1.65:1 | 1.25:1 | 1.30:1 | |
Notes:
1. Above theoretical split
2. 50 ohm nominal impedance standard.
3. All output/combiner ports are in-phase (0° difference).
4. Operating temperature from -55° C to +85° C.
5. 50V Maximum DC voltage
6. Same mechanical dimensions as corresponding V-Line models
| Theoretical power split (dB) for "n-way" power divider | |||||||
| 2-Way | 3-Way | 4-Way | 6-Way | 8-Way | 9-Way | 12-Way | 16-Way |
| 3.01 | 4.77 | 6.02 | 7.78 | 9.03 | 9.54 | 10.79 | 12.04 |
More Power Dividers
|
|
|||||
|
|
|||||
|
|
|||||
|
|
|||||
|
|
|||||
|
|
|||||
|
|
|||||
|
|
|||||
|
|
|||||
|
|
|||||
|
|
Product Categories
Featured Product
![]() |
| 75 Watt M-Series |
| MECA's compact, high performance, 75-watt, Wilkinson power divider/combiner M-Series is ideally suited for system applications from 0.8 to 2.2 GHz where increased power is used to extend system coverage. Your applications will benefit from high isolation, low insertion loss and exceptional VSWR. |
Available Models
Power Divider/Combiners Compact microstrip power divider/combiners delivering high isolation, minimal insertion loss and exceptional phase and amplitude balance. more » “Tee” Configuration Allows unobstructed access to all connector ports. Covering all wireless bands from 0.8 - 3.0 GHz, 2.4 GHz and 5.8 GHz. Idealfor in-building wireless systems. more » DC Blocking Constructed with DC blocking capacitors on all ports except those that are intended to pass DC. more » M-Series 50-watt, Wilkinson series ideally suited for 0.8 to 2.2 GHz to extend system coverage. more » H-Series 100 watt, Wilkinson series ideally designed for systems applications. more » Reactive Splitters High-power capable (700 watts) covering all wireless frequencies from 0.700 - 2.700 GHz. more » |

























