|
Reactive Power Splitters |
|
MECA line of high-power capable (700 watts) reactive RF splitters covering all wireless frequencies from 0.698 - 2.700 GHz. Available in 2-way and 3-way configurations fitted with 7/16 DIN , N or SMA-Female connectors at all ports. Indoor or Outdoor use (IP65).
This reactive RF splitter series provides a low loss, equal power split at all output ports while maintaining excellent amplitude and phase balance. MECA’s unique design eliminates the need for extraneous (often misplaced) mounting hardware when mounted to flat surfaces but also includes a rugged 2” - 5”stainless steel hose clamp (with screws) for mounting to poles.
Reactive Power Splitter
Made in USA
| SMA-Female Power Splitters | |||||||||||||
| Catalog Number |
Freq. (GHz) |
Power (W) |
Isolation (dB) |
Insertion Loss (dB) |
Amplitude Balance (dB) (Max) |
Phase Balance (degrees) (Max) |
VSWR | RFQ | |||||
| Input | Output | ||||||||||||
| Typ | Min | Typ | Max | Typ | Max | Typ | Max | ||||||
| R2S-1.900-M01 | 0.698-2.7 | 100 | ~ | ~ | 0.30 | 0.40 | 0.2 | 2 | 1.10:1 | 1.20:1 | ~ | ~ | |
| R3S-1.900-M01 | 0.698-2.7 | 100 | ~ | ~ | 0.30 | 0.40 | 0.2 | 3 | 1.20:1 | 1.30:1 | ~ | ~ | |
| N-Female Power Splitters | |||||||||||||
| Catalog Number |
Freq. (GHz) |
Power (W) |
Isolation (dB) |
Insertion Loss (dB) |
Amplitude Balance (dB) (Max) |
Phase Balance (degrees) (Max) |
VSWR | RFQ | |||||
| Input | Output | ||||||||||||
| Typ | Min | Typ | Max | Typ | Max | Typ | Max | ||||||
| R2N-1.900-M01 | 0.698-2.7 | 500 | ~ | ~ | 0.30 | 0.40 | 0.2 | 2 | 1.10:1 | 1.20:1 | ~ | ~ | |
| R3N-1.900-M01 | 0.698-2.7 | 500 | ~ | ~ | 0.30 | 0.40 | 0.2 | 3 | 1.20:1 | 1.30:1 | ~ | ~ | |
| 7/16 DIN Power Splitters | |||||||||||||
| Catalog Number |
Freq. (GHz) |
Power (W) |
Isolation (dB) |
Insertion Loss (dB) |
Amplitude Balance (dB) (Max) |
Phase Balance (degrees) (Max) |
VSWR | RFQ | |||||
| Input | Output | ||||||||||||
| Typ | Min | Typ | Max | Typ | Max | Typ | Max | ||||||
| R2D-1.900-M01 | 0.698-2.7 | 700 | ~ | ~ | 0.30 | 0.40 | 0.2 | 2 | 1.10:1 | 1.20:1 | ~ | ~ | |
| R3D-1.900-M01 | 0.698-2.7 | 700 | ~ | ~ | 0.30 | 0.40 | 0.2 | 3 | 1.20:1 | 1.30:1 | ~ | ~ | |
Notes:
1. All units rated for maximum power with load VSWR of 1.20:1 or better.
2. All output/power combiner ports are in-phase (0° difference).
3. 50 ohm nominal impedance standard.
4. Operating temperature from -55° C to +85° C.
| Theoretical power split (dB) for "n-way" power divider | |||||||
| 2-Way | 3-Way | 4-Way | 6-Way | 8-Way | 9-Way | 12-Way | 16-Way |
| 3.01 | 4.77 | 6.02 | 7.78 | 9.03 | 9.54 | 10.79 | 12.04 |
More Power Dividers
|
|
|||||
|
|
|||||
|
|
|||||
|
|
|||||
|
|
|||||
|
|
|||||
|
|
|||||
|
|
|||||
|
|
|||||
|
|
|||||
|
|
Product Categories
Featured Product
 |
| 75 Watt M-Series |
| MECA's compact, high performance, 75-watt, Wilkinson power divider/combiner M-Series is ideally suited for system applications from 0.8 to 2.2 GHz where increased power is used to extend system coverage. Your applications will benefit from high isolation, low insertion loss and exceptional VSWR. |
Available Models
Power Divider/Combiners Compact microstrip power divider/combiners delivering high isolation, minimal insertion loss and exceptional phase and amplitude balance. more » “Tee” Configuration Allows unobstructed access to all connector ports. Covering all wireless bands from 0.8 - 3.0 GHz, 2.4 GHz and 5.8 GHz. Idealfor in-building wireless systems. more » DC Blocking Constructed with DC blocking capacitors on all ports except those that are intended to pass DC. more » M-Series 50-watt, Wilkinson series ideally suited for 0.8 to 2.2 GHz to extend system coverage. more » H-Series 100 watt, Wilkinson series ideally designed for systems applications. more » Reactive Splitters High-power capable (700 watts) covering all wireless frequencies from 0.700 - 2.700 GHz. more » |
