75 Watt Power Divider & Combiner |
|
MECA’s compact, high performance, 75-watt, Wilkinson power divider/combiner series is ideally suited for system applications from 0.8 to 2.2 GHz where increased power is used to extend system coverage. Your applications will benefit from high isolation, low insertion loss and exceptional VSWR. Standard models are available in 2-way through 8-way configurations in both N-Female and SMA-Female connectors with gold-plated contact pins and a rugged aluminum housing to minimize RF EMI.
75 Watt Power Divider & Combiner *
Made in USA
| SMA-Female Power Combiner Models | |||||||||||||
| Catalog Number |
Freq. (GHz) |
Power (W) |
Isolation (dB) |
Insertion Loss (dB) |
Amplitude Balance (dB) (Max) |
Phase Balance (degrees) (Max) |
VSWR | RFQ | |||||
| Input | Output | ||||||||||||
| Typ | Min | Typ | Max | Typ | Max | Typ | Max | ||||||
| M2S-1.500W | 0.8-2.2 | 75 | 27 | 22 | 0.30 | 0.40 | 0.1 | 2 | 1.15:1 | 1.25:1 | 1.10:1 | 1.20:1 | |
| M4S-1.500W | 0.8-2.2 | 75 | 25 | 20 | 0.60 | 0.80 | 0.2 | 4 | 1.25:1 | 1.35:1 | 1.15:1 | 1.25:1 | |
| M8S-1.500W | 0.8-2.2 | 75 | 27 | 22 | 0.80 | 1.20 | 0.2 | 4 | 1.25:1 | 1.35:1 | 1.10:1 | 1.20:1 | |
| M16S-1.500W | 0.8-2.2 | 75 | 25 | 20 | 1.20 | 1.50 | 0.4 | 8 | 1.30:1 | 1.40:1 | 1.10:1 | 1.20:1 | |
| N-Female Power Combiner Models | |||||||||||||
| Catalog Number |
Freq. (GHz) |
Power (W) |
Isolation (dB) |
Insertion Loss (dB) |
Amplitude Balance (dB) (Max) |
Phase Balance (degrees) (Max) |
VSWR | RFQ | |||||
| Input | Output | ||||||||||||
| Typ | Min | Typ | Max | Typ | Max | Typ | Max | ||||||
| M2N-1.500W | 0.8-2.2 | 75 | 27 | 22 | 0.30 | 0.40 | 0.1 | 2 | 1.15:1 | 1.25:1 | 1.10:1 | 1.20:1 | |
| M3N-0.900 | 0.8-1.0 | 50 | 40 | 30 | 0.30 | 0.40 | 0.2 | 3 | 1.10:1 | 1.15:1 | 1.10:1 | 1.15:1 | |
| M4N-1.500W | 0.8-2.2 | 75 | 27 | 22 | 0.40 | 0.60 | 0.2 | 4 | 1.25:1 | 1.35:1 | 1.15:1 | 1.25:1 | |
| M8N-1.500W | 0.8-2.2 | 75 | 27 | 22 | 0.80 | 1.20 | 0.2 | 8 | 1.25:1 | 1.35:1 | 1.10:1 | 1.20:1 | |
* Notes:
1. All units rated for 75 watts maximum input power as a divider or balanced combiner with load VSWR
of 1.20:1 or better.To calculate the combining rated power the following formula is used:
(rated input power of divider * 5%) / "N" # of input channels = max input at each port for combining
2. All output/power combiner ports are in-phase (0° difference).
3. 50 ohm nominal impedance standard.
4. Operating temperature from -55° C to +85° C.
| Theoretical power split (dB) for "n-way" power divider | |||||||
| 2-Way | 3-Way | 4-Way | 6-Way | 8-Way | 9-Way | 12-Way | 16-Way |
| 3.01 | 4.77 | 6.02 | 7.78 | 9.03 | 9.54 | 10.79 | 12.04 |
More Power Dividers
|
|
|||||
|
|
|||||
|
|
|||||
|
|
|||||
|
|
|||||
|
|
|||||
|
|
|||||
|
|
|||||
|
|
|||||
|
|
|||||
|
Featured Product
 |
| 75 Watt M-Series |
| MECA's compact, high performance, 75-watt, Wilkinson power divider/combiner M-Series is ideally suited for system applications from 0.8 to 2.2 GHz where increased power is used to extend system coverage. Your applications will benefit from high isolation, low insertion loss and exceptional VSWR. |
Available Models
Power Divider/Combiners Compact microstrip power divider/combiners delivering high isolation, minimal insertion loss and exceptional phase and amplitude balance. more » “Tee” Configuration Allows unobstructed access to all connector ports. Covering all wireless bands from 0.8 - 3.0 GHz, 2.4 GHz and 5.8 GHz. Idealfor in-building wireless systems. more » DC Blocking Constructed with DC blocking capacitors on all ports except those that are intended to pass DC. more » M-Series 50-watt, Wilkinson series ideally suited for 0.8 to 2.2 GHz to extend system coverage. more » H-Series 100 watt, Wilkinson series ideally designed for systems applications. more » Reactive Splitters High-power capable (700 watts) covering all wireless frequencies from 0.700 - 2.700 GHz. more » |
