RP-TNC Male Termination
Home > RF Terminations > RP- TNC Male

MECA RP-TNC Male Loads are rated for 2 watts average power and a frequency range from DC – 3.000 GHz. Reverse polarity TNC (RP-TNC) is a variation of the standard TNC connector which reverses the polarity of the interface to female contact pins into the male connectors and male contact  pins into the female connectors. RP-TNC connectors are widely used by Wi-Fi  and Wireless LAN equipment manufacturers to comply with FCC regulations to prevent consumers from connecting gain antennas to these systems. MECA manufactures RP-TNC loads designed specifically for high performanceWi-Fi and Wireless LAN systems.  Available from STOCK – 2 weeks ARO.  Made in USA.

RP-TNC Male Termination
Made in USA
Click on Catalog Number to view spec sheet with outline drawing
Average
Power
(Watts)		 Model Catalog
Number		 Peak
Power
(Watts)		 Freq.
(GHz)		 VSWR
(Max)		 Length
(in)		 Diameter
(in)		 Weight(oz) Add to
RFQ
2

 401-5RP 2000 DC-3.0
3.0-6.0		 1.15:1
1.25:1		 1.35 0.65 0.90
Specifying Tip:
For best results when selecting a coaxial termination for a given connector style, make sure to consider the amount of power being absorbed and the acceptable level of reflection (VSWR) that can be tolerated over the operating frequency range.


Convenient Electrical Conversions
VSWR 1.05:1 1.10:1 1.15:1 1.20:1 1.25:1 1.30:1 1.35:1 1.40:1 1.50:1 2.00:1
Return Loss (-dB) 32.256 26.444 23.127 20.828 19.085 17.692 16.540 15.563 13.979 9.542
Voltage Reflection Coeff. 0.024 0.048 0.070 0.091 0.111 0.130 0.149 0.167 0.200 0.333
Match Efficiency (%) 99.94 99.97 99.51 99.17 98.77 98.30 97.78 97.22 96.00 88.89
Mismatch Loss (-dB) 0.003 0.010 0.021 0.036 0.054 0.075 0.097 0.122 0.177 0.512


Notes:
1. 50 ohms nominal impedance is standard
2. Operating temperature from -55° C to +85° C
3. Rated power is at 25° C ambient temperature through natural air convection and derates linearly to 0 watts  @ +125° C
More Terminations
   
N-Male Termination N-Male
N-Male RF Loads with average power ratings from 1 - 500 watts and available in frequencies from DC – 18.000 GHz.
N-Female Terminations N-Female
N-Female RF Loads with average power ratings from 2 - 500 watts and available in frequencies from DC – 12.400 GHz.
   
SMA-Male Termination SMA-Male
SMA-Male RF Loads with average power ratings from 1 - 50 watts and available in frequencies from DC – 18.000 GHz.
SMA-Female terminations SMA-Female
SMA-Female RF Loads with average power ratings from 5 - 50 watts and available in frequencies from DC – 12.400 GHz.
   
BNC Loads BNC-Female
BNC-Female RF Loads are rated for 2 and 5 watts average power and a frequency range from DC – 12.4 GHz.
TNC Loads TNC-Male
TNC-Male RF Loads are rated for 2w average power and a frequency range from DC – 6.000 GHz.
   
RP-TNC Termination RP-TNC Male
RP-TNC Male Loads are rated for 2 watts average power and a frequency range from DC – 3.000 GHz.
QMA-Male Termination QMA-Male
TQ1 series QMA male load cover all commercial wireless bands from DC - 3.0 GHz making them ideal for next generation BTS field upgrades.
   
Feed-Thru Terminations Feed-Thru Terminations
Feed-Thru Terminations operate between 300-1000 MHz and are available off-the-shelf in N, SMA, BNC and TNC connector configurations.
7/16 DIN Loads 7/16 DIN
7/16 DIN-Male termination models with power ratings of 1 - 100 watts and available in frequencies from DC – 6.0 GHz.

Featured Termination

CTN-250 250 W RF Termination
7/16 DIN Terminations
New from MECA 1 - 100 watt 7/16 DIN terminations featuring a frequency range of DC-3.0 GHz for the 2 and 5 watts and DC-6.0 GHz for the 35, 50 and 100 watt models.

Top Selling Termination

V-Line RF loads are optimized for excellent performance across all wireless bands and their rugged construction makes them ideal for both base station and in-building wireless systems.  Always available from STOCK - even in large quantities - for your next generation equipment deployments!

More »